Chimney Cap & Crown in Brick - Made to Fit, Priced in Writing

Trusted Chimney Cap & Crown for Brick Homeowners

A properly fitted Chimney Cap & Crown - Brick typically costs between $280 and $950 depending on whether you’re replacing a rusted cap or rebuilding a cracked concrete crown. Most jobs are completed in a single visit, and Hearthstone Chimney Co. has been doing this work in Ocean County for over 42 years. Call us at (609) 657-3371 for a free estimate with upfront pricing.

Call (609) 657-3371

We’ve seen what happens when Brick homeowners skip this. The salt air off the Atlantic accelerates rust on cheap caps. Freeze-thaw cycles through our Jersey Shore winters split concrete crowns wide open. Before long, water is running down your flue, spalling your brick, and rotting the framing around your fireplace. We’ve rebuilt too many fireboxes and replaced too much structural lumber that could have been saved with a $400 cap installed right the first time.

Our technicians are background-checked, uniformed, and carry professional-grade materials from Gelco, Olympia Chimney, and Famco on every truck. Every inspection ends with photos you can see and a plain-English verdict. No scare tactics. No mystery recommendations. If your crown has hairline cracks that can wait a season, we’ll tell you. If water is already penetrating and threatening your liner, we’ll show you exactly where. Our home page has more about our full range of services.

What Our Chimney Cap & Crown Service Includes

Cap Installation

A chimney cap is the metal cover that sits atop your flue, keeping rain, animals, and debris out while letting smoke escape. In Brick, we install caps on chimneys that have never had one, often on older homes in neighborhoods like Herbertsville and Shore Acres where original construction skipped this basic protection. We measure your flue precisely, fabricate or order the correct cap, and secure it with stainless steel fasteners that won’t corrode in our coastal environment. Most installations take under an hour, and we carry common sizes for Gelco and Olympia Chimney caps on our trucks.

Cap Replacement

Replacement becomes necessary when your existing cap has rusted through, blown off in a nor’easter, or was never the right size to begin with. We remove the old cap, inspect the flue tile for damage that the leaking cap may have caused, and install a new cap that actually fits. In Brick’s salt-air climate, we see a lot of galvanized steel caps that lasted maybe five years before the rust set in. We recommend stainless steel or copper from Famco or Gelco for this area. You’ll get photos of the flue condition before and after, and the 90-Day Done Right Promise in writing.

Crown Repair

The crown is the concrete slab that tops your masonry chimney, sloped to shed water away from the flue. Cracks in the crown are the single most common entry point for water damage we find in Brick inspections, especially on homes built in the 1970s and 1980s when crown construction was often an afterthought. We chase out cracked or spalled concrete, apply a bonding agent, and pour new high-strength concrete with proper slope and overhang. For crowns with minor cracking but sound structure, we may recommend crown coating instead. The estimate includes exactly what we’re doing and why.

Crown Coating

Crown coating is a flexible, waterproof membrane applied over an existing crown that has surface cracks but remains structurally sound. It’s a cost-effective alternative to full crown repair when caught early, typically saving Brick homeowners $400 to $700 compared to a rebuild. We use professional-grade elastomeric coatings designed for chimney crowns, not the hardware-store sealers that crack and peel within a season. The surface must be properly prepared, cracks opened and filled, and the coating applied to the correct thickness. Done right, it extends crown life by 10 to 15 years. We’ll show you the crown photos and tell you honestly whether coating is appropriate or if you’re throwing money at a crown that needs rebuilding.

Multi-Flue Cap

Homes with multiple fireplaces or a fireplace and a furnace sharing one chimney need a multi-flue cap, a single cover that protects two or more flues with proper clearance and ventilation. These are common in larger Brick homes, particularly in developments like Greenbriar and Laurelton where dual-flue chimneys were standard. Multi-flue caps must be sized and fabricated precisely; an ill-fitting cap creates downdraft problems, creosote buildup, and carbon monoxide risks. We measure on-site, specify the correct cap from Olympia Chimney or custom-fabricate if needed, and ensure each flue has adequate draft. Installation requires working at height with proper fall protection, which our technicians are trained and equipped for.

Custom Cap

Some chimneys in Brick, especially on custom homes in areas like Adamston and Drum Point, have unusual dimensions, decorative shrouds, or architectural requirements that rule out standard caps. We fabricate and install custom caps in copper, stainless steel, or black galvanized to match your home’s aesthetic while providing full protection. Custom work begins with detailed measurements and often a template, followed by fabrication at our shop and installation on a return visit. We show you the design before we build it, and the price is fixed in writing. No surprises on the bill.

Brands We Service for Chimney Cap & Crown

We’ve installed and serviced hundreds of Gelco caps across Ocean County. Their stainless steel models hold up particularly well in Brick’s coastal environment, and we stock common sizes and replacement parts on our trucks. When a Gelco cap needs a new mesh screen or a storm has damaged the lid, we can often repair rather than replace, which saves you money and keeps a quality product in service.

Olympia Chimney multi-flue caps are another staple of our inventory. Their engineering for draft performance is excellent, and we’ve found their mounting systems hold securely through the high winds that hit the Jersey Shore each winter. Famco’s custom copper work is what we specify when a homeowner wants protection that also enhances curb appeal. Whether you have Gelco, Olympia Chimney, Famco, or any other make, we can help. We also work with HeatShield materials for crown applications where a bonded repair system is the right solution.

Signs You Need Chimney Cap & Crown Right Now

• Water stains on your ceiling near the fireplace. This means water is already inside your chimney structure, running down the flue, and finding its way into your home. In Brick’s humid summers, that moisture breeds mold in your framing. The source is almost always a missing, damaged, or improperly fitted cap, or cracks in the crown that have worsened through freeze-thaw cycles.
• Rust stains running down your chimney exterior. Orange or brown streaks on the brick indicate your metal cap is corroding, or worse, that your flue liner is rusting from moisture exposure. Salt air accelerates this dramatically. We’ve replaced liners in Brick homes where a $350 cap replacement would have prevented $2,800 in liner damage.
• Animals or nesting debris in your fireplace. Squirrels, raccoons, and birds enter through uncapped flues. A cap with proper mesh prevents this. If you’re hearing scratching or finding twigs and leaves in your firebox, the cap is missing or the mesh has failed. This is also a carbon monoxide hazard if the blockage restricts draft.
• Spalling or flaking brick on your chimney top. The face of your brick is popping off because water is getting in and freezing. This starts at the crown and works down. Once spalling begins, it accelerates. Crown repair or coating stops the water entry; waiting means rebuilding the upper courses of your chimney.
• White efflorescence on your chimney exterior. That chalky white residue is minerals left behind as water evaporates through your brick. It’s a sign of chronic water saturation, and the crown or cap is the most likely entry point. In Brick’s climate, efflorescence is a warning that freeze-thaw damage is coming next.

Our Chimney Cap & Crown Process - Step by Step

1. 1
   Schedule your inspection. Call (609) 657-3371 and a live person answers, 24 hours a day, 7 days a week. We’ll find a time that works for you. No automated callbacks, no app to download.
2. 2
   Level-2 camera inspection and documentation. Our technician arrives in a marked vehicle, uniformed and background-checked. We set up our ladder with proper fall protection, inspect the cap and crown from the roof, and run a camera down your flue to document interior condition. You get photos of everything we find and a plain-English verdict on what needs attention now, what can wait, and what isn’t a problem at all.
3. 3
   Upfront estimate in writing. If work is needed, we explain exactly what, why, and what it costs. The number on the estimate is the number on the invoice. We don’t start work until you approve the scope and price. For crown work, we’ll show you the crack patterns and explain whether coating or rebuilding is the right approach.
4. 4
   Professional installation or repair. Most cap and crown jobs are completed in a single visit. We use professional-grade materials from trusted brands, installed to manufacturer specifications and local code. For custom caps, we take precise measurements and schedule a return installation. Our technicians work cleanly and leave your property as they found it.
5. 5
   Final inspection and documentation. We photograph the completed work, review it with you, and provide written documentation of the 90-Day Done Right Promise. If anything isn’t right, we come back and make it right. No arguing, no paperwork to chase down. That’s the Keystone Standard we’ve operated by since 1984.

How Much Does Chimney Cap & Crown Cost in Brick?

Chimney Cap & Crown Near Brick - Our Service Area

We serve homeowners throughout Ocean County and the northern Monmouth County shore. From our base in Brick, we regularly work in Chimney Cap & Crown in Lakewood, Chimney Cap & Crown in Howell, Wall, Tinton Falls, Neptune, Ocean Township, Point Pleasant, Asbury Park, Ramtown, Manasquan, and Belmar. Response times are typically same-week for non-urgent work, and we prioritize calls where water is actively entering the structure or the chimney is in use. Whether you’re in a shore cottage in Point Pleasant or a established home in Brick’s Greenbriar section, we know the local building stock, the common failure patterns, and the best materials for this climate.

Frequently Asked Questions - Chimney Cap & Crown in Brick

Schedule Your Chimney Cap & Crown Service in Brick Today

Call Hearthstone Chimney Co. at (609) 657-3371 for your free estimate. A live person answers 24 hours a day, 7 days a week. We’ll schedule your inspection, show you exactly what your chimney needs with photos you can see, and give you upfront pricing with no surprises on the bill. Our work is backed by the 90-Day Done Right Promise in writing. We’ve served Ocean County since 1984, and we’re not going anywhere. Done right, and we stand behind it.

Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Brick and local communities since 1984.